Dyno pull Vid

carlosgto · 05-20-2006, 11:22 AM

;) The Goat was acting funny last year so I decided to have it checked out. We put it on the dyno for some pulls. We only could get 367rwhp. I know something had to be wrong. When I got home I pulled the plugs out and found that 2 plugs were bad. I changed all the plugs and now she is running very strong. Can't wait to put the oldgoat back on the dyno and see if I can get it back to the 500rwhp that the engine builder rated the motor at.

The back ground noise is the air comp.

http://videos.streetfire.net/video/A...538538D808.htm

**HiFlow5 0** · 05-20-2006, 11:33 AM

Still looks like it pulled pretty good. Can't wait to see an updated video.

VelocityC6 · 05-20-2006, 10:45 PM

We gotta line them up sometime! How much does your GTO weigh?

Grey Bush · 11-10-2006, 11:30 AM

why not put new plugs in before taking it off the dyno?

brown n down · 11-10-2006, 11:33 AM

Doctor Murdock2 · 11-11-2006, 01:47 PM

Do you work in Easthampton?

BoostN · 11-14-2006, 09:58 AM

Quote:

Originally Posted by carlosgto

Can't wait to put the oldgoat back on the dyno and see if I can get it back to the 500rwhp that the engine builder rated the motor at.

The back ground noise is the air comp.

http://videos.streetfire.net/video/A...538538D808.htm

If you took the heavy 20"s off gaurantee youd see a differance not a 130whp like you need for your goal of 500. But would definetly help other then that looks like she would pick up and go for an old goat

Kitt · 11-14-2006, 10:08 AM

Quote:

Originally Posted by byron3636

why not put new plugs in before taking it off the dyno?

dyno time isn't free.

2.slow2go · 12-01-2006, 06:33 AM

not a fan of that body style, but i have a 67' with a 400 small block and 3 2 barrel carbs. when im done we should have a go at it. you have the 389?

05-20-2006, 11:22 AM	#1
carlosgto Senior Member Join Date: Apr 2005 Location: ludlow, Ma. Posts: 135	Dyno pull Vid ;) The Goat was acting funny last year so I decided to have it checked out. We put it on the dyno for some pulls. We only could get 367rwhp. I know something had to be wrong. When I got home I pulled the plugs out and found that 2 plugs were bad. I changed all the plugs and now she is running very strong. Can't wait to put the oldgoat back on the dyno and see if I can get it back to the 500rwhp that the engine builder rated the motor at. The back ground noise is the air comp. http://videos.streetfire.net/video/A...538538D808.htm

05-20-2006, 11:33 AM	#2
HiFlow5 0 Super Moderator Join Date: May 2004 Location: East Longmeadow Posts: 5,947	Still looks like it pulled pretty good. Can't wait to see an updated video. __________________ -1991 Ford Mustang Notch (work in progress) -1999 Ford F150 (big and Green)

05-20-2006, 10:45 PM	#3
VelocityC6 Senior Member Join Date: Dec 2004 Posts: 4,810	We gotta line them up sometime! How much does your GTO weigh? __________________ 2006 Lemans Blue C6 Z06 Radical right wing conservative!

11-10-2006, 11:30 AM	#4
Grey Bush Senior Member Join Date: Sep 2006 Location: South Hadley, ma Posts: 4,104	why not put new plugs in before taking it off the dyno? __________________ aka byron3636

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements and help support Massdriven! Sponsored links

11-11-2006, 01:47 PM	#6
Doctor Murdock2 Senior Member Join Date: Apr 2005 Location: Western Mass Posts: 4,201	Do you work in Easthampton?

12-01-2006, 06:33 AM	#9
2.slow2go Senior Member Join Date: Jul 2005 Location: easthampton Posts: 1,948	not a fan of that body style, but i have a 67' with a 400 small block and 3 2 barrel carbs. when im done we should have a go at it. you have the 389?